Seite 10/69
Page 10/47
JMA-Optic
2.2.3. Obligations of the user
It is the obligation of the user:
■
The general guidelines and/or national legislation, national regulations and technical
regulations pertaining to medical products are to be applied and fulfilled both during
installation and operation of the product appropriate to the stated intended use.
■
To comply with all the safety instructions stated in the operating instructions.
■
To carry out all of the inspection and maintenance work regularly as specified in the
operating instructions.
■
To only use fault free working equipment.
■
To ensure that the device is functionally safe and in a proper state prior to every use of the device.
■
To ensure all the provided operating instructions that which art part of the measurement
system, are kept within close range of the measurement system and are accessible to users
at all time.
■
To protect oneself, the patients and third parties against dangers.
■
To prevent a contamination occurring by the product.
During use, it is necessary to comply with the legal regulations especially:
■
The current work safety regulations.
■
The current accident prevention measures.
Responsibility for safety, reliability and effective performance of the JMA-Optic is assumed in case:
■
Assembly work, extensions, new setting, changes or repairs are carried out by trained
technicians or dealers explicitly authorized by the manufacturer.
■
The product operated in compliance with the operating instructions.
■
The information technology components provided by the user comply with the technical
requirements for hardware and software lined out in these operating instructions, and that
they are installed and set up according to the applicable instructions for these components.
■
The place of installation corresponds with the specified environmental conditions for the
measurement system and the current installation regulations.
■
Only the software made available by the manufacturer, as well as the components and
accessory parts listed in these operating instructions are used with the system.
