3
STEP 3: SHADING INSTALLATION
Push the rail back until it
is fully engaged
Center the shading in the window opening and push the head
rail into the mounting brackets as shown.
Be sure the motor power wire is not pinched by the bracket.
STEP 2: BATTERY WAND INSTALLATION (IF TRANSFORMER SKIP TO STEP 3)
WALL MOUNT
Attach the wand clips in the desired location with the screws
provided. Before mounting the wand, make sure that the wand
and excess wire will not interfere with the operation of the
shading. Extension wires are available if needed.
Press the wand into the clips.
Please Note: Be sure battery wire will reach the motor plug.
HEAD RAIL MOUNT
Attach the wand clips to the back of the head rail as shown.
Important
: Position the clip so that the battery wand will be
between mounting brackets.
Before mounting the wand, make sure that the wand and
excess wire will not interfere with the operation of the shading.
Extension wires are available if needed.
Press the wand into the clip.
Please Note: Be sure battery wire will reach the motor plug.
