ALL WEATHER WICKER PRODUCT CARE
Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a
mild solution of soap and water, rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. Over time
nuts and bolts can loosen. Occasinally, check nuts and bolts on all chairs and tables, re-tighten if necessary.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product
construction.
Keep assembly area at leat 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or
electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and use.
The table is not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only.
Improper use of this product or failure to use as directed may result in injury. Not intended for commercial use.
CARE & MAINTENANCE
DO NOT RETURN THIS PRODUCT TO THE STORE. FOR MISSING PARTS OR QUESTIONS TO THIS PRODUCT PLEASE
CALL US AT 1-888-733-8169 OR EMAIL US AT
[email protected] OR [email protected] OR [email protected]
IMPORTANT:
Please read all the instructions and warnings before assembling. In order to make the whole product adjust to the best, please install
all the screws on the product before fully tighten, and note to put the washer to the screw before putting the screw into the screw
hole.
WARNING:
Use the correct bolts as indicated. All bolts should be hand tight untill the complete piece is assembled ( This
will make the assembly process much easier ). Once the piece is fully assembled, then go back and tight all
bolts with provided tool.
BROADMOOR ROUND GLASS TABLE
ASSEMBLY INSTRUCTION
ITEM# GB20-502
SKU# 810459674
