Zebra™ Dazzle™ Sump Level Controller
6
If you have questions or require product support, please call 888.249.4855.
Sump Levels
Setup the Sump Controller unit so it can identify two sump levels: High level and Low level. They are
described below.
• High level
Level of fluid in the sump when all machines and attachments that can impact the sump level are
TURNED OFF. This is the highest level that fluids can reach in the sump. (Examples of machines and
attachments include: high pressure attach ments, chillers, etc.)
• Low level
Level of fluid in the sump when all machines and attachments that can im pact the sump level are
TURNED ON and operating at maximum capacity. This is the lowest level that fluids can reach with
machines and attachments operating.
Once these two levels are set, the Sump Con troller unit, in conjunction with the Sump Level sensor,
automatically monitor and adjust sump levels. When the sump level falls below the Low level, the
controller detects a fill condition and cycles the solenoid valve on a 30 second cycle (12 seconds
open, 18 seconds closed) until the sump fluid returns to the Low level. The LEDs indicate the fill
condition.
The steps to setup the High level and Low level are in the “Programming the Sump Controller Unit”
section.
