Zebra Dazzle Manual Download Page 9

Zebra™ Dazzle™ Sump Level Controller

 7

If you have questions or require product support, please call 888.249.4855.

• Sump is above Low level. Solenoid is CLOSED.

• Sump is below Low level and in fill condition.  

  Solenoid is CLOSED.

• Solenoid is OPEN and sump is being filled. 

   Yellow LEDs flashing.

• Sump is two inches below Low level in a low-alert  

  condition. Solenoid is OPEN and sump is being filled.  

  Red LEDs flashing.

• Sump is in emergency alert low condition. 

  Solenoid is CLOSED. Audible alarm is active.

• Sump is two inches above High level and in emergency  

  alert condition. Solenoid is CLOSED. Red LEDs flashing.  

  Audible alarm is active.

LEDs Defined 

While the Sump Controller unit is running, you might see the colors of the LEDs change. The list 

 below defines the colors and the LED patterns.

 

GREEN

 

The sump controller is at Low level 

 

YELLOW

 

Sump is below Low level 

 

 

- Solid yellow    

Solenoid closed

 

 

- Flashing yellow 

Solenoid open (sump is being filled)

 

RED

   Warning of errors — both low- and high-level alerts

Summary of Contents for Dazzle













Reviews: