Zebex Z-8072, User Manual

Page: 17 / 32

2D Image Hands-Free Scanner 11
U
SER
’
S
M
ANUAL
Programming the Scanner
1. When the scanner is powered on (green LED lights), find the <Set> barcode in the
Programming Guide and present this barcode to the scanner. When the scanner
gives two beeps, it means the scanner is in programming mode.
2. Decide which parameters are required and find their barcodes in the Programming
Guide.
3. Cover unwanted codes with your hand and present the desired codes, one by one,
to the scanner; the scanner beeps once as it accepts each code.
4. When done, again present the <End> barcode to the scanner. The scanner beeps
thrice, it means the scanner is out of programming mode. The scanner has been
programmed.
5. Test again with known-good barcodes. If results are good, you are done setting up.
Otherwise, return to step 1 and try again.