OUTLINE FOR PRODUCT REFERANCE MANUAL
Z-3070 CCD BARCODE SCANNER
GENERAL CONFIGURATION
Start of Configuration
End of Configuration
SCANNING MODE SELECTION
(for laser scanner)
For series laser scanners, there are 2 scanning modes to suit your
application requirements.
Trigger Mode
Pulse Mode
The scanner becomes inactive as soon as
the data is transmitted. It must be
triggered to become active again.
The scanner will light up when press the
pulse mode trigger switch once. And, the
scanner will turn off for next pressing.
SCANNING MODE SELECTION
(For CCD scanner)
The scanner becomes inactive as soon as
the data is transmitted. It must be
triggered to become active again.
In auto scan mode, the scanner is still
active after the data is transmitted, but the
successive transmission of the same bar
code is not allowed when the trigger switch
is pressed again.
This scanner will light up when press the
scanner trigger switch once. And, the
scanner will turn off for next pressing.
This mode is similar to Auto scan mode,
but double reading for the same barcode is
prohibited if the scanner switch is pressed.
Trigger mode
Auto scan mode
Alternate mode
Repeat mode
ZEBEX INDUSTRIES INC.
All Rights Reserved.
19
