OUTLINE FOR PRODUCT REFERANCE MANUAL
Z-3070 CCD BARCODE SCANNER
SYSTEM SETTING
Start of Configuration
RESET
The reading of the “RESET” label turns
all the parameters back to default
values.
When you intend to turn your scanner
back to default parameters, please
scan the “Start of Configuration” label
first, then scan “RESET” label and
finally scan the “End of Configuration”
label.
ABORT
The reading of the "ABORT" label
discards all the parameters read prior
to the "End of configuration".
RS-232C
PC/AT
USB
WAND EMULATION
The scanner remains in the last
interface mode when the scanner is
reset. The label below should be
scanned if the scanner is configured
the first time.
SHOW VERSION
The reading of the “SHOW VERSION”
label will be show firmware version.
End of Configuration
ZEBEX INDUSTRIES INC.
All Rights Reserved.
18
