OUTLINE FOR PRODUCT REFERANCE MANUAL
Z-3070 CCD BARCODE SCANNER
Connecting the scanner to a host
The Z-3070 Series scanner supports RS-232C, keyboard Emulation,
Wand Emulation, and USB interface to a host system. This section
describes how to set up each of these connections.
RS-232C Connection
This
connection is made either through RS-232C interface cable with D
type 9 Pin connector or through a RS-232C interface cable with D type 25
Pin connector to the serial port on the host.
1. Connect the RS-232C interface cable to the bottom of the scanner, as
described in
Installing the interface Cable.
2. Connect the other end of the interface cable to the serial port on the
host.
3. Connect the power supply.
RS-232C Connection with D type 9 Pin connector
RS-232C Connection with D type 25 Pin connector
ZEBEX INDUSTRIES INC.
All Rights Reserved.
6
