12
HOW TO INSTALL THE BOX OF PROBE
COVERS INTO THE CRADLE DISPENSER
Insert the bottom of a new probe cover box onto the
top of the dispenser arms with the opening tab at
the top, facing forward. Do not open the top tab/lid
of the probe cover box. The probe cover box should
be pushed down gently, but firmly, over the dispenser
arms until the arms penetrate into the inside base
of the box. In view of the special design of the probe
cover box, the tab/lid of the box will automatically
open when inserted onto the dispenser arms. The
probe cover box goes down when a probe cover is
attached to the thermometer and the next probe
cover rises, ready for use.
SETTINg UP THE STORAgE CRAdLE MOdEL ACT8000
REMOVING AND PUTTING BACK THE THERMOMETER
Hold and push down on the thermometer releasing the top
of the probe head from the cradle, then pick up the
thermometer. The probe cover box, if installed, swings forward
ready for use. To return, put the base of the thermometer
back onto the thermometer support, gently push down and
swing the probe head under the top of the cradle, releasing
your hand from the thermometer automatically stores it in
the protective cradle.
BOX OF PROBE COVERS
THERMOMETER SUPPORT
STORAGE CRADLE
DISPENSER ARMS
