The thermometer automatically stores the last 10
measurements taken into its memory. The latest
temperature taken is displayed first when recalled from
the memory. To recall a temperature from the memory,
turn the thermometer off, then press and hold down the
ON/OFF button for approximately 2 seconds. A flashing
‘01’ will appear with a small ‘M’ at the lower right of the
display. The temperature value of this memory is shown
on the display for 2 seconds. If the ON/OFF button is
pressed again before the 2 seconds are up, the next
memory ‘02’ temperature is displayed. Repeat this process
to see all of the 10 stored temperatures; otherwise the
thermometer returns to the normal measuring mode.
Remember that the latest measurements taken are
displayed first when recalled from the memory.
CHANGING DISPLAY FROM °C TO °F
Your Zeal thermometer can display in either degrees
Celsius (°C) or degrees Fahrenheit (°F). It is preset to
display Celsius (°C).
To switch to Fahrenheit, press the ON/OFF button twice,
one right after another. Hold the second press down for
about 2 seconds until the symbol “°F” (or “°C”) appears,
with a beep, on the display. Releasing the on/off button
returns the thermometer to the measuring mode. Repeat
the procedure to change back to Celsius.
MEMORY MODE
USINg THE THERMOMETER
MOdELS ACT8000 ANd ACT8000R
19
Established 1888
ZEAL
The Clinicians choice
