3.1 Battery connection
POWER CONNECTION
- In case of a single battery,
two power cables (positive and negative) and one
communication cable will be connected, as shown
above
.
The communication cable is located
inside the kit in the inverter box.
Maximum DoD
programmable
80%
8.1.1 SINGLE PYLONTECH US2000 BATTERY
3.3 Grid Connections
Note:
DIP switches must be set as per
the factory settings, all in the OFF
position (00000)
Communication connections between batteries and inverter:
•
CAN of
Master Battery
COM Port of
inverter
Inverter
negative
Inverter
positive
Communication cable pinout between
Pylontech battery and Inverter, from left to right
PIN 1:
CAN H (blue wire)
PIN 2:
CAN L (white-blue wire)
PIN 1:
White-Orange
PIN 2:
Orange
PIN 3:
White-Green
PIN 4:
Blue
PIN 5:
White-Blue
PIN 6:
Green
PIN 7:
White-Brown
PIN 8:
Brown
Pylontech
Inverter
