8.2 PYLONTECH BATTERIES IN PARALLEL
9.3.1 SINGLE WECO 4K4-LT BATTERY
3.1 Battery connection
Maximum DoD
programmable
90%
DO NOT CHANGE DIP
SWITCH POSITION WITH
THE BATTERY ON!!
OFF
Communication cable pinout between WeCo
battery and Inverter, from left to right
PIN 1:
CAN (White-Orange)
PIN 2:
CAN (Orange)
PIN 1:
White-Orange
PIN 2:
Orange
PIN 3:
White-Green
PIN 4:
Blue
PIN 5:
White-Blue
PIN 6:
Green
PIN 7:
White-Brown
PIN 8:
Brown
WeCo
Inverter
The communication cable is located
inside the kit in the inverter box.
Communication connections between batteries and inverter:
•
CAN-A of
Master Battery
COM Port of
inverter
In case of a SINGLE BATTERY:
1. Connect the
CAN-A
input
2. Set the DIP Switches
3. The power connections must be
made by attaching the appropriate B+
and B- connectors to the corresponding
input (as shown in the figure).
4. Connect the ground cable to
the battery through the threaded
hole
COM
GND
POWER +/-
