4 / 45
4)
Lift the cover up as far as the flat cable allows it, and open the hooks connecting the flat
cable to the terminal on the inverter’s communication board, so that both the cable and
front cover can be removed.
Be sure to correctly open both plastic hooks before removing the cable.
Figure 2 – Opening of the hooks on the slot of the flat connector
5)
Insert the Wi-Fi card into the dedicated slot on the communication board, which is also
marked by an outline, as shown in the following image.
Figure 3 – Position of the Wi-Fi card on the communication board
Make sure to first insert the two plastic connectors in the slots positioned at the top, and
then match the pins of the Wi-Fi card to the slots at the bottom. Press the card lightly to
make sure it is mounted properly.
