28 / 45
2.3.
Verification
Wait two minutes after configuring the adapter and then go back to the Wi-Fi network selection
screen to verify that the AP_******* network is no longer present. The absence of the Wi-Fi network
in the list will confirm the successful configuration of the Wi-Fi adapter.
Figure 36 – Wi-Fi network search on Smartphone (iOS and Android); Access point of the Wi-Fi adapter is no longer visible
If the Wi-Fi network is still present in the list, connect to it again and enter the status page. Check
the following information:
a.
Wireless STA mode
i.
Router SSID > Router name
ii.
Signal Quality > other than 0%
iii.
IP address > other than 0.0.0.0
b.
Remote server information
i.
Remote server A > Connected
