25 / 67
User’s Manual 3PH 100KTL-136KTL-HV
Rev. 1.0 24/02/2021
Identification: MD-AL-GI-00
Rev. 1.0 of 24/02/2021 - Application: GID
3.5.
Moving the 3PH 100KTL-136KTL-HV inverter
This section describes how to move the inverter correctly
1)
When opening the packaging, insert your hands into the slots on both sides of the inverter and take a
hold of it as shown in Figure below. Two people are needed to carry out this operation in order to ensure
the safety of people and the correct handling of the inverter.
Figure 10 – Removing the inverter from its packaging
2)
Lift the inverter from its packing box and move it to the installation position.
To prevent damage and personal injury, hold the inverter firmly when moving,
as it is a heavy piece of equipment.
Do not position the inverter with the input/output terminals in contact with
other surfaces, as these are not designed to support the weight of the inverter.
Always position the inverter horizontally.
When placing the inverter on the floor, make sure to place a support under the
unit to protect its front door.
Use auxiliary handle inside the package for moving the inverter. After use, keep
it well for future usage.
Attention
