Zcom WS10G2 User Manual Download Page 8

Page: 8 / 78

Hyperion Series

Wireless LAN Controller

User Manual

58-150008-IQN_V1.0

Page 5

Chapter 3.

YSTEM

OUNDATION

3.1.

YSTEM

RCHITECTURE

The Wi-Fi system architecture using Hyperion series WLC and Thin APs is illustrated below.

Figure 3-1 Wi-Fi System Architecture using WLC

The WLC has a southbound interface named the WLAN port. This port is the accessing port for all Thin APs connecting
to WLC

；

while the northbound ports based on WLC internal VLAN Interfaces (VIF) connect to the Portal / Radius for user

authentication and Internet for user services.

Two types of tunnel are established from Thin AP to WLC and will take charge of all communications:



The CAPWAP tunnel, an access stratum management tunnel, focuses on provisioning AP and all statistics
reports.



The WLTP data tunnel focuses on UE (User Endpoint) non-access stratum data transmission, including service
traffic and authentication messages.

Summary of Contents for WS10G2















































































Search results

Summary of Contents for WS10G2

Reviews:

Related manuals for WS10G2

Brands by name

Popular brands

Zcom WS10G2, User Manual

Search results

Summary of Contents for WS10G2

Reviews:

Related manuals for WS10G2

Brands by name

Popular brands