Hyperion Series
Wireless LAN Controller
User Manual
58-150008-IQN_V1.0
Page 33
Parameter
Description
Interface
Specify the VLAN Interface (VIF) on which the current Router Advertisement
setting will act.
Prefix Addr
IPv6 prefix represents the routing or a subnet of a segment of IPv6 addresses.
The default length is 64 bits.
RA Status
This is a switch to enable or disable the IPv6 Router Advertisement function in
WLC.
RA Autoconfig Enable
IPv6 Neighbor Discover (ND) function will auto-configure the
addresses,
address prefixes, routes, and other configuration parameters
. This switch is
used open or close the ND autoconfig function in WLC.
RA Min Interval (3-1350 s)
The minimum periodically time interval for WLC to send Router Advertisement
message.
RA Max Interval (4-1800 s)
The maximum periodically time interval for WLC to send Router Advertisement
message.
RA Managed Flag (0, 1)
A flag indicating that the WLC can auto-configured the address using DHCP
server besides using Router Advertisements (RA). This function needs to enable
DHCPv6 for address.
RA Other Config Flag (0, 1)
A flag indicating that the WLC can auto-configured the other (non-address)
information using administered (stateful) protocol. This function needs to
enable DHCPv6 for other information.
RA Reachable Time (0-360000 ms)
This is the Neighbor Discover Reachable time in milliseconds within which the
WLC assumes a neighbor is reachable after receiving a reachability
confirmation.
RA Retransmit Time (0-360000
ms)
This is the Neighbor Discover Retransmit time in milliseconds after which the
WLC can retransmit the Neighbor Solicitation messages.
MTU (0, 1200-1500)
This is the Router Advertisement (RA) maximum transmission unit (MTU), It
must be the MTU value that all nodes on a link use.
RA Hop Limit (0-255)
It is the default value to be placed in the Hop Count field of the IPv6 header for
outgoing (unicast) IPv6 packets.
RA Default Life Time (0, 10-9000 s)
The lifetime associated with the default router in seconds. A value of 0 indicates
that the router is not a default router and will not appear on the default router
list. The router lifetime applies only to the router's usefulness as a default
router; it does not apply to information contained in other message fields or
options.
RA Preferred Life Time
(86400-2592000 s)
The RA preferred lifetime in seconds associated with the default router.
RA Valid Life Time
(86400-2592000 s)
The RA valid lifetime in seconds associated with the default router.
RA Setting List
Above settings can be appended to the RA setting list as a new entry.
Click the
Add
button to append a new IPv6 router advertisement entry to the server list.
Summary of Contents for WS10G2
Page 1: ...Revision 3 2 1 ...
