SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
User Manual
Page 19
Parameter
Description
•
Peak - Displays the peak number of UDP network connections.
The following parameters are available in this section:
Parameter
Description
Network/Protocol Display the network/Protocol used by the active network connection.
Source/Destination Displays the source/destination IP address and TCP/UDP port number of the
active network connection.
Transfer
Displays the transfer data rate (bytes and packets) of the active network
connection.
System
4.3.2.
4.3.2.1.
System
This page is used to display and configure basic system settings like the logging and the date/time
settings.
4.3.2.2.
Administration
4.3.2.2.1.
Router Password
This page is used to change the password for accessing on the AP.
4.3.2.2.2.
SSH Access
The following parameters are available in this section:
Parameter
Description
Port
Enter the TCP/UDP port number for the SSH connection. The default
port number is 22.
4.3.2.3.
Scheduled Tasks
This page is used to display and configure the scheduled tasks settings on the AP.
