SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
User Manual
Page 38
The following parameters are available in this section:
Parameter
Description
Bring up on boot
Select this option to bring up this interface when the device
rebooted.
Enable IPv6 negotiation on
the PPP link
Select this option to enable IPv6 negotiation on the PPP link.
Use default gateway
Select this option to use the DHCP assigned default gateway on this
interface.
Use gateway metric
Enter the metric for the gateway here.
Use DNS servers advertised
by peer
Select this option to use the DHCP assigned DNS server addresses on
this interface.
Use custom DNS servers
Enter the IP address or domain name for a custom DNS server here.
More than one entry can be created.
LCP echo failure threshold The peer will be presumed to be dead after the given amount of LCP
echo failures are reached. Enter 0 to ignore failures.
LCP echo interval
LCP echo request are sent at this specified interval. This function is
only effective in conjunction with the failure threshold function.
Inactivity timeout
The connection is closed after the inactivity timer reached the
timeout value. Enter 0 to never timeout the connection.
Override MTU
Enter the MTU value here to override the default MTU value used on
this interface.
