ZBA,
Inc.
12 10
8
6 4 2
11
9 7
5
3
1
7 Specifications
7.1 Pin Configurations & Dimensions
Pin-out 12 pin 2mm dual row connector
(SAMTEC CLT106-02-L-D or equiv.)
Pin 1 = Vcc (3.3 Volts regulated)
Pin 2 = GND
Pin 3 = RxD
Pin 4 = TxD
Pin 5 = CTS
Pin 6 = RTS
Pin 7 = GND Zero (0) ohm Jumper internal to module to GND
Pin 8 = Reserved (connected to PIO for future use)
Pin 9 = NCONN Output from module indicating the module is connected (lo = connected)
Pin 10 = NPWR - PFET-gate w/10K resistor to GND. (Module is powered-on if left floating)
Pin 11 = Reserved (connected to PIO for future use)
Pin 12 = Reserved (connected to PIO for future use)
2)
Pin outline
:
Can-non ferrous
connector
Antenna
Holes in PCB
to connector
Top view
Side view
Note: The PCB board has 12 holes to accommodate connecting the module via 2mm dual row pins
through the PCB from the bottom.
Figure 2
Top and Side View of module indicating the Pin directions
Summary of Contents for BC04-191
Page 25: ...ZBA Inc End ...
