ZBA,
Inc.
2
Scope
The intention of this specification is to provide general guidelines on the integration
of the BC04-191 Bluetooth assembly. This product, which complies with Bluetooth
Specification 12.0, is designed to help companies offer Bluetooth enabled products by
speeding their development processes with a ready to integrate Bluetooth assembly with
external antenna attachment.
3
Bluetooth Assembly Description
:
The BC04-191 is a general purpose Bluetooth module incorporating an on-board
meandering line antenna designed to be incorporated into an end product.
The BC04-
191 Bluetooth Module is a Class 2 Bluetooth module using BlueCore4-External chipset from
Cambridge Silicon Radio, a leading Bluetooth chipset supplier. It provides a fully compliant
Bluetooth system for data and voice communications. The module and device firmware is fully
compliant with the Bluetooth specification V2.0.
The Bluetooth assembly is available in two different variants:
1) UART transport with serial port emulation (Serial Port Profile)
2) UART transport with HCI interface (only upon special request)
4
Features
a
Operating Frequency Band 2.40 GHz~2.48GHz unlicensed ISM Band
a
Class 2 type Output Power
a
RF Shielding can constructed of non-ferrous metals.
a
Support Firmware Upgrade (via The UART)
a
12 pin 2mm board to board connector (top or bottom connections )
a
Active Bluetooth Connections signal
a
Built-in Power control for turning off the Module
a
Support Piconet, up to 7 Slaves
a
Scatternet Support
a
PCM Audio Interface
a
Low Voltage Power Supply, 2.7V to 3.6V
a
Built-in 8Mbit Flash Memory
a
Low Power Modes Available: Park, Sniff, Hold and Deep Sleep
a
Dimensions: 30mm X 17.5mm X 3.15 mm
a
Development board available.
Summary of Contents for BC04-191
Page 25: ...ZBA Inc End ...
