ZBA,
Inc.
AT+PASSWORD? OK
+PASSWORD: < Para1>
Note: The default authentication password = 1111
8.2.8 Set Device Name
Default = 1111
Command
Response
Parameter
AT+NAME= < Para1>
OK
AT+NAME? OK
+NAME <Para1>
Para1= Device name
Default= ZBA-SPP
Note: The default Device name = ZBA-SPP.
8.2.9 Set Device Type
Command
Response
Parameter
AT+CLASS=< Para1>
OK
AT+CLASS? OK
CLASS<Para1>
Para1 Device type (Length
must = 6 characters)
default = 000000
8.2.10
Set Master/Slave Mode
Command
Response
Parameter
AT+ROLE=< Para1>
OK
AT+ROLE? OK
ROLE <Para1>
Para1
Slave = 0, Master = 1
Default = 0, Slave
Note:1 The default mode is Slave.
Note2: While in Master Mode the module will respond with
+INQRES: remote BTADDR
for each of the Bluetooth devices that are in the neighbourhood
To connect to a particular device you will need to type
AT+RADDR= BT address
(the specific device you wish to pair determined from the
AT+INQ? Command).
Summary of Contents for BC04-191
Page 25: ...ZBA Inc End ...
