Zaxcom Deva 24 Input Control
31
Input Control
The input control menu is where input parameters are adjusted for both the analog and digital inputs.
Configuring an input
Selecting an input to configure
To select the desired input tap on the arrow keys on either side of the input name.
That will jump to the next / previous input. Holding the SHIFT key while tapping the
arrows will change inputs by 4.
Naming an input
Each input can be optionally named for ease of identification. Also when a named
input is assigned to an ISO track the entered name will become the track name. That
name will be displayed in the track meter on the home screen and will be embedded
in the metadata for that track.
To name the input hold the shift key and tap on the INPUT NAME key to open the on
screen keyboard. Each input name can be up to 16 characters in length.
Adjusting the input paramaters
From the left side of the input configure screen the following parameters can be
adjusted:
•
Mic / Line input - analog input 1 thru 12 only
•
48 volt phantom - analog inputs 1 thru 12 only
•
AES 42 power - digital input 1 thru 16 only
•
Input delay - adjustable from 0 to 40 milliseconds
•
High pass filter - adjustable from 0 to 240Hz
•
Limiter Off and On
•
Equalization
