Zaxcom Deva 24 Output Routing
15
Output Routing
The output routing menu is where the record tracks are assigned to an output bus / busses.
Routing record tracks to an output bus
Selecting the output bus to be routed
Tap on the track box for the desired bus (1 thru 10) which will open the track
select matrix. The bus numbers are listed on the left.
•
Output buses 1 thru 6 are routed to their corresponding XLR and TA5 output
number.
•
Output bussed 7 and 8 are routed directly to the headphone 2 output.
•
Output busses 9 and 10 are routed the tape and mono output.
Selecting the track(s)
When the track select matrix is open, tap on the track(s) and or return input(s) to be
routed to the output bus. After the track(s) have been selected the track number(s)
will be displayed in the track box.
Adding delay to the outputs
Delay can be optionally added to each output bus. To add delay, tap on the delay
box for the desired bus. Tap on the box once and it will turn it orange; when the
box is orange the menu encoder knob can be used to adjust the delay. Tap on the
box one more time to open the delay entry menu. From the menu the delay can
be manually entered. Delay can be set up to 999mS.
Assiging coms to an output bus
Tap on the desired com box to route the coms (1 and 2) to output bus. An “X” will
appear when a com has been routed to the bus. Please note access to com 2 is
available when using the Mix 16.
