Zaxcom Deva 24 Setup Menu
26
Post Record time set
Post-record is how long Deva 24 will continue to record after stop is pushed.
Tapping the POST-RECORD key will turn the key orange, then using the menu encoder knob the post-record time can
be dialed in. Tap on the key again will open a numeric key board that will allow the post-record rate to be entered.
The post-record can be set from 1 to 10 seconds in 1 second increments.
Effects Copy
Effects copy will allow the compressor, notch, equalization and delay settings to be
copied from one input to other inputs.
To copy the effects:
•
Turn on the desired effects to be copied by tapping the desired effects key(s).
•
Select the input to be copied FROM by tapping the FROM key.
•
Select the input(s) that the effects will be copied to by tapping the TO key.
•
Tap the COPY key.
Clock and date set
Tapping on the CLOCK key will open the date and clock menu. This is where Deva 24’s
internal clock and calendar will be adjusted from.
The date style can be set to either US (MMDDYY) or European style (DDMMYY).
Maintaining the internal clock
Please note that Deva 24 contains a battery backed real-time clock. This clock is
used to maintain running time code and internal calendar. It is advised to change
the battery every 2 to 3 years.
The battery is a CR2320 3V coin cell battery.
