USER AND MAINTENANCE MANUAL
22
ELECTROMAGNETIC VALVE
DLK22LT-LC
MAX TILT
RECOMMENDED
OPTIMAL DISTANCE
± 45°
5 ÷ 10 mm
4
INSTALLATION
4.1
Fixing of the valve
4.2
Contact-less gluing application
The DLK22LT-LC valve must be fixed on a proper bracket thanks to the threaded holes (M5 dimension)
machined on the valve body.
A vibration-free environment and a good accessibility for regulation, cleaning and maintenance and a
good fixing of the valve to the support/bracket and of the latter to the machine must be guaranteed.
Where is possible it’s always better to adopt this type of application because it is convenient both for the
ease of application and to avoid the wear of the nozzle.
The ideal working position of the valve is vertical, with the nozzle facing downwards.
It’s possible to tilt the valve of ±45° degrees (see next page).
The optimal distance between the nozzle and the surface to be glue is between 5 and 10 mm
(see next page).
Other different positions are possible upon approval of the Zator.
The maximum fixing depth of the fixing screws in the body valve is 6 mm. To avoid coil damage
don’t exceed to this measure.
2 x M5
MAX 6mm
of fixing
depth
