Zanussi ZWACR0723V, User Manual

Page: 2 / 36

Read Safety Precautions Before Operation and Installation
Incorrect installation due to ignore of instructions can cause serious damage or injury.
Safety Precautions
WARNING
2
1. Installation must be performed by an authorized dealer or professionally trained technician.
2. Installation
- Where refrigerant pipes shall be compliance with national gas regulations.
- That mechanical connections shall be accessible for maintenance purposes.
- In cases that require mechanical ventilation, ventilation openings shall be kept clear of obstruction.
- When disposing of the product is used, be based on national regulations, properly processed.
3. Servicing
- Any person who is involved with working on or breaking into a refrigerant circuit should hold
a current valid certificate from an industry-accredited assessment authority, which
authorises their competence to handle refrigerants safely in accordance with an industry
recognised assessment specification.
4. Maintenance and repair requires the assistance of other skilled personnel shall be carried out
under the supervision of the person competent in the use of flammable refrigerants.
5. Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
6. The appliance shall be stored in a room without continuously operating ignition sources
(for example: open flames,an operating gas appliance or an operating electric heater)
7. Be more careful that foreign matter(oil, water,etc) does not enter the piping. Also, when storing
the piping, securely seal the opening by pinching, taping, etc.
8. Do not pierce or burn.
9. Be aware that refrigerants may not contain an odour.
10. All working procedure that affects safety means shall only be carried by competent persons.
11. Appliance shall be stored in a well -ventilated area where the room size corresponds to the
room area as specifiec for operation.
12. The appliance shall be stored so as to prevent mechanical damage from occurring.
13. The appliance is using mildly flammable refrigerant R32 and tested to comply with IEC
60335-2-40. There is no minimum room area requirement for the appliance.
14. The installation height shall not be lower than 0.75m.