WARNING! The oven becomes very
hot. There is a risk of burns.
CAUTION! If there are other
appliances installed in the same
cabinet, do not use them when the
Pyrolysis function operates. It can
cause damage to the appliance.
1. Wipe out the cavity with a wet, soft cloth.
2. Clean the inner side of the door with hot water,
so that the residues do not burn from the hot
air.
3. Set the Pyrolysis function. Refer to "Daily use"
chapter, "Oven Functions".
4. When
flashes, press or to set the
pyrolysis duration:
Option
Description
P1
Light cleaning. Du-
ration: 1 h.
P2
Normal cleaning.
Duration: 1 h 30
min.
Press or turn the knob for the temperature to
start the pyrolysis.
You can use the END function to delay the start of
the cleaning.
During the pyrolysis the oven lamp is off.
5. When the oven is at the set temperature, the
door locks. The display shows and the bars
of the heat indicator until the door unlocks.
To stop pyrolysis before it is completed, turn
the knob for the oven functions to the off
position.
6. When pyrolysis is completed, the display
shows the time of day. The oven door stays
locked.
7. When the oven is cool again, the door unlocks.
CLEANING REMINDER
To remind you that the pyrolysis is necessary, PYR
flashes in the display for 10 seconds after each
activation and deactivation of the oven.
The cleaning reminder goes out:
• after the end of the pyrolysis.
• if you press and at the same
time while PYR flashes in the
display.
CLEANING THE OVEN DOOR
The oven door has four glass panels. You can
remove the oven door and the internal glass panels
to clean them.
The oven door may close if you try to
remove the glass panels before you
remove the oven door.
CAUTION! Do not use the appliance
without the glass panels.
1. Open the door fully and hold the two door
hinges.
2. Lift and turn the levers on the two hinges.
3. Close the oven door halfway to the first
opening position. Then pull forward and remove
the door from its seat.
21
