Zanussi ZHC 928, Installation, Use And Maintenance Handbook

Page: 9 / 12

19 GB
USE
Control panel
L Light Switches the lighting system on and off.
S1 Led Motor running led.
S2 Led Optimum speed led.
S3 Led Intensive speed led.
S4 Led Grease filters saturated alarm led.
S5 Led Activated charcoal filter exhausted alarm led.
To disable this indicator (Ducted hoods) simultaneously press buttons R (using
a sharp object, for example a pencil) and V2. To enable it again, press buttons R
and V3.
R Reset Internal Filter Alarms Reset button.
V1 Motor Switches the extractor motor on and off.
V2 Speed Decreases the operating speed.
V3 Speed Increases the operating speed.
V4 Optimum Preset optimum speed. To customise the Optimum speed setting, select the Speed
speed you require using buttons V2 and V3 then press V4 within 10 seconds (during
this period the corresponding led S2 will flash). The setting you enter will remain
active until the Hood is turned off.
V5 Intensive Maximum speed, used to eliminate the highest levels of cooking vapour
speed emission. Returns to Optimum speed automatically after it has been in operation
for 15 minutes. Intensive speed can also be turned off manually by pressing
button V4.
T Delayed This device allows any residual odours to be removed without having to wait
shutdown and turn the appliance off, as the Motor and Lighting will switch off automatically
at the end of the selected time.
By pressing button T in succession it is possible to set the delayed shutdown of
the appliance to 15, 30 and 60 minutes, respectively. The selected time is shown
by leds T1, T2, T3. To move from one time to another, simply press button T
until the required led lights up. The time selected in this way will start from
zero. The delayed shutdown function can be turned off by pressing button V4.
T1 Led 15’ delayed shutdown indicator led.
T2 Led 30’ delayed shutdown indicator led.
T3 Led 60’ delayed shutdown indicator led.
0 - 1
0 - 1
15
30
60
reset
reset
delay
L
S1
V1
V2
V3
V4
V5
T
S2
S3
S4
T1 T2 T3
S5
R