18
GB
Flue assembly - Mounting the hood body
• Position the upper chimney section and fix the
upper part to the frame using the 2 screws 12c
provided.
• Similarly, position the lower chimney section
without fixing it, ensuring that the outlet from
connector 15 is in line with the chimney intake.
• The air outlet directional grill 8 must be fitted
after the installation of the chimney.
Before fixing the hood body to the frame:
• remove the grease filters from the hood body;
• remove the activated carbon odour filters, if
fitted.
• from below, use the 4 screws 12f provided to
fix the hood body to the frame.
• For the recirculation version, locate the
directional grill 8 in its housing. Ensure that it
is inserted correctly in connector 15.
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-
pole switch having a contact gap of at least 3
mm.
• Take off the upper protection bracket by
unscrewing the screws.
• Connect the control connector Cmd.
• Reassemble the protection bracket.
• Take off the bracket which is opposite to the
previous one by unscrewing the screws.
• Connect the spotlights connector L.
• Reassemble the protection bracket.
• For the recirculation version, fit the activated
carbon odour filter.
• Replace the grease filters.
12f
8b
Cmd
L
