Zanussi ZDM17301SA, User Manual

Page: 15 / 20

THE WASHING AND DRYING RESULTS ARE NOT SATISFACTORY
Problem Possible cause Possible solution
The dishes are not clean. The selected programme was
not applicable for the type of
load and/or for the degree of
soil.
Make sure that the programme
is applicable for the type of
load and/or for the degree of
soil.
The basket was not loaded
correctly, water did not reach
all surfaces.
Load the basket correctly.
The spray arm could not turn
freely because of the incorrect
arrangement of the load.
Make sure that the spray arm
can turn freely before you start
a programme.
The filters are clogged. Make sure that the filters are
clean.
The filters are not correctly as-
sembled and installed.
Make sure that the filters are
correctly assembled and instal-
led.
The quantity of detergent was
not enough or no detergent
was used.
Make sure that a correct
amount of detergent is used.
Scale particles on the dishes. The salt container is empty. Fill the salt container with spe-
cific salt for dishwashers.
The cap of the salt container is
not closed correctly.
Make sure that the salt con-
tainer is correctly closed.
There are streaks or milky
stains on glasses and dishes.
The level of the water softener
is too high.
Set the water softener to a
lower level.
There are bluish layers on
glasses and dishes.
The rinse aid dosage is too
high.
Set the rinse aid dispenser to a
lower position.
The detergent can be the
cause.
Try a different brand of deter-
gent.
The dishes are wet and dull. A programme without a drying
phase has been selected.
Set a programme with a drying
phase.
The rinse aid dispenser is emp-
ty.
Fill the rinse aid dispenser with
rinse aid.
INSTALLATION
ASSEMBLY
Make sure to position the appliance
with minimum space of 50 mm on
both sides of fully open door.
15