Zanussi ZDM17301SA, User Manual

Page: 8 / 20

7. Close the water tap.
Wait until the dishes are cold before you remove
them from the appliance.
There can be water on the sides and
the door of the appliance.
CANCELLING A PROGRAMME
1. Press the Start / Pause.
2. Press and hold the Programme for 3 seconds.
The programme comes back to its initial settings.
Make sure that there is detergent in
the detergent dispenser before you
start a new programme.
INTERRUPTING A PROGRAMME
1. Open the appliance door.
The appliance stops.
2. Close the appliance door.
The programme continues from the point of
interruption.
STARTING A PROGRAMME WITH DELAY
START
1. Close the appliance door.
2. Open the water tap.
3. Press the On / Off to activate the appliance.
4. Set a programme.
5. Press Delay Start to delay start of a programme
by up to 24 hours.
6. Press Start / Pause to start the countdown.
":" symbol flashes.
When the countdown is completed, the programme
starts automatically.
CANCELLING DELAY START
1. Press Start / Pause.
2. Press Delay Start until 0 comes on.
3. Press Start / Pause. The programme starts
automatically.
DAILY USE
USE OF THE APPLIANCE
1. Fill the salt container with salt for dishwashers.
2. Fill the rinse aid dispenser with rinse aid.
3. Load the basket.
4. Open the water tap.
5. Set the correct programme for the type of load
and the degree of soil.
6. Add the detergent.
7. Start the programme.
USE OF DISHWASHER SALT
Hard water contains a high quantity of minerals that
can cause damage to the appliance and bad
washing results. The water softener neutralises
these minerals.
Contact your local water authority for information
about the hardness of the water in your area.
CAUTION! Only use salt specifically
designed for dishwashers. Other types
of salt will cause damage to the
appliance.
FILLING THE SALT CONTAINER
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container (Only
for the first time).
3. Use the funnel to fill the salt container with
dishwasher salt.
4. Remove the salt around the opening of the salt
container.
5. Turn the cap of the salt container clockwise to
close the salt container.
Water and salt can come out from the
salt container when you fill it, which
causes corrosion. To prevent it, start a
programme immediately after filling the
salt container.
8