When the appliance senses the need for cleaning,
the indicator is on. Start the Machine Care
programme to clean the appliance interior.
How to start the Machine Care programme
Before starting the Machine Care
programme, clean the filters and spray
arms.
1. Use a descaler or a cleaning product designed
specifically for dishwashers. Follow the
instructions on the packaging. Do not put
dishes in the baskets.
2. Press and hold simultaneously Extra Power
and AUTO for about 3 seconds.
The indicators and Extra Power flash. The
display shows the programme duration.
3. Close the appliance door to start the
programme.
When the programme is complete, the indicator
is off.
INTERNAL CLEANING
• Clean the appliance interior with a soft damp
cloth.
• Do not use abrasive products, abrasive cleaning
pads, sharp tools, strong chemicals, scourer or
solvents.
• Wipe clean the door, including the rubber
gasket, once a week.
• To maintain the performance of your appliance,
use a cleaning product designed specifically for
dishwashers at least once every two months.
Carefully follow the instructions on the
packaging of the product.
• For optimal cleaning results, start the
programme Machine Care.
REMOVAL OF FOREIGN OBJECTS
Check the filters and the sump after each use of the
dishwasher. Foreign objects (e.g. pieces of glass,
plastic, bones or toothpicks, etc) decrease the
cleaning performance and can cause damage to
the drain pump.
CAUTION! If unable to remove the
foreign objects, contact an Authorised
Service Centre.
1. Disassemble the filters system as instructed in
this chapter.
2. Remove any foreign objects manually.
3. Reassemble the filters as instructed in this
chapter.
EXTERNAL CLEANING
• Clean the appliance with a moist soft cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning
pads or solvents.
CLEANING THE FILTERS
The filter system is made of 3 parts.
C
B
A
1. Turn the filter (B) counterclockwise and remove
it.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
17
