16
INSTRUCTIONS FOR THE INSTALLER
ADVICE FOR SAFETY
•
Before installation ensure that the local
distribution conditions (gas nature and
pressure) and the pre-setting of the appliance
are consistent;
•
This appliance must be installed only in a
room with good ventilation;
•
The adjusting conditions of this appliance are
mentioned on the rating plate;
•
This appliance is not connected to a flue gas
exhaust device. It has to be installed and
connected in accordance with the rules in
force. Special attention should be granted to
the applicable disposal concerning ventilation;
•
This appliance is of y type, meaning that the
furniture units can exceed its height;
•
The neighbouring furniture panels has to be
heat proof or protected by such material.
Connection to gas main
•
Check that the counter flow and the diameter
of piping are enough to supply all the
appliances of the installation (take counsel
with the gas distribution company);
•
Check that all connections are tight;
•
Install an accessible and visible barrage tap;
•
If you use a flexible pipe it has to be easily
inspected all along and must not pass behind
the appliance;
•
Change the flexible pipe little before its expire
date stamped on it.
Electric connection
Check that:
•
the power of the installation is enough;
•
the supplying lines are in good conditions;
•
the diameter of the cables complies with the
installation rules;
•
the fix installation has a device with contacts
with omnipolar switch with a minimum opening
between contacts of minimum3 mm.
Installation and maintenance have to be made by a
qualified person in accordance with the regulations
in force, which are:
We deny any responsibility in cases of
accidents or incidents caused lack of
grounding or missgrounding.
Summary of Contents for ZCM5160
Page 1: ...0 INSTRUCTION BOOK ELECTRIC GAS COOKER ZCM 5160 ...
Page 9: ...8 fig 5 ...
