1
2
1
5. Pull the door trim to the front to remove it.
6. Remove the glass panels.
To install panels follow the procedure in
reverse.
Replacing the lamp
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
WARNING!
Danger of electrocution! Disconnect
the fuse before you replace the
lamp.
The lamp and the lamp glass cover
can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.
The back lamp
The lamp glass cover is at the back
of the cavity.
1. Turn the lamp glass cover counterclockwise
to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with a suitable 300
°C heat-resistant oven lamp.
Use the same oven lamp type.
4. Install the glass cover.
Removing the drawer
WARNING!
When the oven is in use, heat can
build up in the drawer. Do not keep
flammable things in there (e.g.
cleaning materials, plastic bags,
oven gloves, paper, cleaning sprays,
etc.).
The drawer below the oven can be removed for
cleaning.
1. Pull the drawer out until it stops.
1
2
2. Lift the drawer at a small angle and remove
it from the drawer support rails.
Inserting the drawer:
1. To insert the drawer set the drawer on the
support rails. Make sure that the catches
engage correctly into the rails
2. Lower the drawer until it is horizontal and
push it in.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
Possible cause
Remedy
You cannot activate the appli-
ance.
The appliance is not connected
to an electrical supply or it is
connected incorrectly.
Check if the appliance is correct-
ly connected to the electrical
supply.
22
www.zanussi.com
Summary of Contents for ZCE65210WA
Page 1: ...EN ZCE65210WA User Manual Cooker ...
Page 27: ...www zanussi com 27 ...
