adjust the side measurement to centre the
appliance.
If you changed the dimensions of the
cooker, you must align the non-tip
device correctly.
CAUTION!
If the space between the bench
cupboards is larger than the width of
the appliance, you must adjust the
side measurement to the center of
the appliance.
Electrical installation
WARNING!
The manufacturer is not responsible
if you do not follow the safety
precautions from Safety chapters.
This appliance is supplied without a main plug
or a main cable.
Applicable cable type: H05 RR-F with adequate
cross-section.
WARNING!
Before you connect the mains cable
to the terminal, measure the voltage
between phases in the house
network. Then, refer to the
connection label at the back of the
appliance to use the correct
electrical installation This order of
steps prevents from installation
errors and damage to the electrical
components of the appliance.
WARNING!
The power cable must not touch the
part of the appliance shown in the
illustration.
CH
Garantie, Garanzia, Guarantee
Kundendienst, service-clientèle, Servizio
clienti, Customer Service Centres
Servicestellen
Points de Service
Servizio dopo ven-
dita
Point of Service
5506 Mägenwil/
Zürich Industries-
trasse 10
3018 Bern Morgen-
strasse 131
1028 Préverenges Le
Trési 6
6928 Manno Via Vio-
lino 11
16
www.zanussi.com
