background image

15

TECHNICAL ASSISTANCE AND SPARE PARTS

Before leaving the factory this appliance was
tested  and controlled by expert and specialized
personnel in order to give the best working
results. All repairs or controls which may be
necessary should be undertaken with maximum
care and attention.
For this reason we recommend you always
contact the Retailer who sold it or our nearest
Assistance Centre, specifying the type of problem
and the model of the appliance in your
possession.

The Manufacturer is not responsible for possible inaccuracies, caused by printing or
transcription  errors, contained in the present manual.  It reserves the right to make any
modifications to its products which it deems necessary or useful, even in the interest of the
user, without prejudizing essential operating and security characteristics.

Important!
This appliance is easy to use. Nonetheless,
to obtain the best results it is important that
this brochure be read carefully and all the
instructions followed before using for the
first time.
The brochure provides the correct
indications for installation, use and
maintenance as well as providing useful
advice.

Summary of Contents for Hobs















Reviews: