40
End of cooking digital programmer (Fig. 15)
In some models it has the function of switching off the
oven at the end of pre-selected cooking time.
The programmer has an electric clock which indicates
the time of day and a timer with an acoustic signal.
Fig. 15 illustrates the programmer’s commands;
switches A and B carry out the necessary regulations
foreseen, as follows:
Switch A
Turned in a clockwise direction permits the time shown
on the digital clock to be corrected (at the time of
installation, electricity cuts, to advance or turn back,
etc.).
Switch B
Turned in a clockwise direction sets:
the length of cooking time (max. 210 minutes);
interruption of the acoustic signal (position
);
manual operation (position
).
The above signals appear on face C.
Fig. 15
PROGRAMMING OF COOKING
Manual operation
The oven can be used normally, i.e. without any
programme. In such case switch B of the programmer
should be turned in a clockwise direction until symbol
il funzionamento manuale del forno (posizione
).
coincides with the mark on face C.
Programmed operation of the oven
Prearrange the food to be cooked; turn switch B in a
clockwise direction and preset the minutes presumed
for the end of cooking on switch C;
turn the oven switch to the temperature required.
At the end of the established time an acoustic signal
intervenes; to switch off it is sufficient to turn switch B
to symbol
visible on face C, corresponding to the
mark on the face itself.
A B
C
Summary of Contents for GAS AND ELECTROGAS COOKERS
Page 27: ...55 ...
