10
Modification of a programme
which is running
To modify a programme, first set the machine to PAUSE
by pressing the START/PAUSE button. Before the
machine starts the heating phase, i.e. within the first 15
minutes for cotton programmes, 10 minutes for
synthetic and delicate programmes and 5 minutes for the
wool programme, the following parameters can be
modified:
-
Fabrics
-
Temperature
-
ECONOMY or QUICK WASH.
The PREWASH option can be cancelled, but cannot be
added, once the programme has started.
The SPIN option can be modified before the final spin
and the EXTRA RINSE option can be cancelled before
the rinse cycle starts.
To restart the wash programme, press the
START/PAUSE button again.
Opening the door after the
programme has started
The door can only be opened before the machine starts
the heating phase (within the first 15, 10 or 5 minutes,
depending on the programme selected - see paragraph
above).
Set the machine to PAUSE (by pressing the
START/PAUSE button).
If the door does not open, this means that the machine is
already heating, or that the water level is above the
bottom edge of the door.
This prevents large quantities of water from gushing out
when the door is opened.
The door can only be opened when the pilot light next
to the handle goes out.
