9
10 START/PAUSE button
This button has three functions:
a) Start
After having selected the required wash programme,
press this button to start the machine; the display stops
flashing.
b) Pause
To interrupt a programme which is running, press the
START/PAUSE button: the figures displayed will start
to flash.
To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.
c) Empty out water
At the end of a programme which stops with water in
the drum (RINSE HOLD option), or after the soak
programme, press the START/PAUSE button to empty
out the water: after a soak programme, the machine will
empty only; after RINSE HOLD programmes, the
machine will empty and spin.
11 DELAY START button
This button allows starting of the machine to be delayed
by a maximum of 19 hours.
The button must be pressed before pressing the
START/PAUSE button.
The figures indicating the required delay appear in the
display next to the button. After one minute, the
machine starts its countdown (every hour).
During the last hour, the remaining time is displayed
every 5 minutes.
The delayed start function cannot be used with the
SPIN and DRAIN programmes.
To modify or cancel the preset delay, press the
START/PAUSE button, then press the DELAY START
button until the required value is displayed or, if you
wish to cancel the delay, until the symbol
0
h is
displayed.
Then press the START/PAUSE button again.
When the delay is cancelled, the display shows the
duration of the wash programme previously selected.
12 Operating pilot lights
The pilot lights come on individually, or in groups,
according to the options selected.
The pilot lights flash for about three seconds if wash
options are incorrectly selected. The message Err is
displayed.
