background image

2

SAFETY

•  Always follow this Manual for your safety and to prevent damage to the product.

•  Do not connect more than one load to a single power outlet at a time. Risk of overheating  

the wiring or fire!

•  Do not connect or interface this device with incompatible products. Otherwise there is a risk 

of an electrical short circuit, resulting in damage to this product.

•  Protect the display main board and screen from deformation by any stress. Do not apply 

heavy loads. Otherwise there is a risk of fire.

•  Do not clean the display screen or housing with water or detergents. Risk of damage  

to the display housing and/or screen, electrical short circuit, and/or fire! Clean the display 

with a soft, dry cloth made of cotton or microfibre. This will prevent scratching the display 

screen. Never use toilet paper or tissues.

•  Do not install in a highly humid indoor environment. Risk of electrical short circuit and fire!

•  Disconnect the power cord from the mains by holding the plug and not the cable. Damage  

to the power cord cable may result in an electric short circuit or a fire.

•  Do not plug the power cord to the mains with wet hands. Electrocution hazard!

•  Do not attempt to disassemble, repair or alter this product on your own. Risk of electrocution, 

damage to the product and/or fire!

•  Do not install a current breaker on the mains connection of the device. Electrocution hazard!

PRODUCT DESCRIPTION

•  4.3” colour LCD touch screen

•  4-core wiring

•  Intuitive interface

•  Internal calls (display-to-display intercom 

mode)

•  Public Address mode

•  Gate and wicket opening control

•  Supports up to two CCTV feeds

•  Supports up to two entrance panels

•  On-demand video feed monitoring from 

entrance panels and all connected CCTV 

cameras

•  Two-way voice communication

•  High display screen resolution: 800 × 480

•  Clear voice handset-free device

•  Language selection

•  Intuitive buttons

•  10-step voice volume control

•  10-step brightness, contrast and 

saturation control

•  10-step ringtone volume control

•  13 polyphonic ringtones

WIRING PROFILE

•  ≤ 50 m (4 x 0.5 mm

2

)

•  ≤ 75 m (4 x 0.75 mm

2

)

•  ≤ 100 m (4 x 1.0 mm

2

)

TECHNICAL DATA

•  Operating temperature: -30°C to +60°C

•  Supply voltage: 110-240 V AC / 50-60 Hz; 

14.5 V DC / 0.8 A

•  Power input: 7 W (max); 0.7 W (standby)

•  Operating RH: 0% to 95%

•  Display dimensions: 170 x 116 x 16 mm

•  Weight: 206 g

PRODUCT COMPONENTS

•  1 x Display unit

•  1 x Operating Manual

•  1 x Base stand

•  2 x Wall plugs

•  2 x M4 x 30 screws

•  2 x 5-pin male connector

•  1 x 4-pin male connector

•  1 x 4-pin male connector

Summary of Contents for VP-816B













Reviews: