11
SYSTEM SETTINGS
With the display on standby, touch
and open the System Settings menu.
Item
System functions
Options
Note
1
LANGUAGE
Default setting: PL (Polish) (optional: EN for English).
2
RING TIME
Default setting: 30 s (10 to 60 s, adjustable in 5 s steps).
3
RING VOLUME
Default setting: 0.7, adjustable in the 01-10 range. (00)
mutes the sound.
4
DO NOT DISTURB MODE
The mode is disabled by default during a call from
an entrance panel, display-to-display intercom (internal)
calls and the public address mode. The LED will flash
if this mode is enabled.
5
MONITORING
The mode is disabled by default. The monitoring
of remote display microphones can be enabled
in the System Settings.
6
MONITOR UNLOCK
Touch
to unlock the electric catch linked
to the entrance panel. Touch
to open the gate
linked to the entrance panel.
7
DEVICE ADDRESS
Room 1 / 2 / 3 / 4
Choose ROOM 1
on the display that should
be the main (master) display
of the system. The setting will
be yellow if the same device
address is set in two displays
in the video entry phone
system.
8
RING TYPE
Door 1 Ring Type
Default setting: 01;
options: 01-13
Door 2 Ring Type
Default setting: 02;
options: 01-13
Intercom Ring Type
Default setting: 03;
options: 01-13
9
RING REPEAT
ENABLE
The ringtone will sound re-
peatedly.
DISABLE
The ringtone will sound once.
10
PORT STATE
None / CCTV1 / CCTV1&2
11
RESTORE DEFAULT
Restores the display unit settings to the default values.
