DOC-USR-0214-04
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
31
Pro-MPEG Forward Error Correction
The DME-10-G supports encode of TSRTP streams with streams with Pro-MPEG Forward Error
Correction (FEC).
(1)
Return to the user interface.
(2)
If necessary, click the “Stop” button in the “Channel Controls” section of the CH1 tab or the
“Stop All” button in the lower right corner of any screen to stop any current encoding.
(3)
Set “Output Format” to “TSRTP”. It must be TSRTP in order to use Pro-MPEG FEC.
(4)
After setting the "Output Format" the "FEC Enable" dropdown will become visible. Change the
value for “FEC Enable” to “True”.
(5)
This will allow for setting the number of FEC columns and rows. The default setting is 5x1.
This is a medium level of coverage that will work in many situations. The number of columns
multiplied by the number of rows must be less than or equal to 100, so 10x10 would be an
example of the maximum coverage. Keep in mind larger numbers of columns and rows result
in a larger latency during decode.
(6)
Once “FEC enable” is set to “True” and the columns and rows are set to the desired numbers,
click the “Start” button.
Figure 26 Enabling Pro-MPEG FEC Encode
(2) Change to
“TSRTP”
(4) Click “Start”
(3) Select
“True”
(1) If necessary, click “Stop”
