Z3Stream-SDI User Instructions
DOC-USR-0117-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
Z3Stream.com
45
Video Bitrate
(CBR Only)
100 – 12000K (
3000K
)
Textbox for entering video bitrate. For example:
1M = 1,000,000 bits per second
1000K = 1,000,000 bits per second
2.5M = Not a Valid Format
Frame Rate
Full
Half
Quarter
Sixth
Used to encode at less than the input frame rate
(for example, an input frame rate of 30fps with
Half
selected would cause an output stream of
15fps). If interlaced input is used then this is used
to reduce the number of fields being encoded.
Audio Enable
True
False
True
enables the encode of audio from the video
source.
Output Setup
Output Format
RTP/RTSP
UDP
RTMP
TS Over RTP
Output format of the encoded stream.
RTP requires the use of the RTSP URL (see Section
7.2, “ Stream RTP” for more details).
If UDP is selected, don’t forget to check the value
of TS Rate to make sure it is in line with
expectation.
(Custom option only)
TSRTP streams TS over RTP.
See Section 7.3, “Stream RTMP” for more on using
the RTMP format.
Dest Address
192.168.x.y
(192.168.0.6)
The IP address of the destination of the encoded
stream.
Dest Port
(UDP, RTP/RTSP or TS
Over RTP Only)
0 – 9999
(
5004
)
The destination port that the encoder is streaming
to.
Authentication
(RTMP only)
Disable
Enable
When in RTMP mode, the encoder supports entering
an authentication User Name and Password.
If this is desired, set to
Enable
. User and Password
text boxes then become active.
User
(RTMP Only)
User name to enter when
Authentication
is
enabled.
