Z3Stream-SDI User Instructions
DOC-USR-0117-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
Z3Stream.com
15
6.2
HDMI Encoder Setup
(1)
Select a video source with non-HDCP
6
HDMI output.
(2)
Verify your source works as expected:
a.
Power on the video source.
b.
Connect an HDMI cable from the source output to your TV or monitor.
c.
Change your source settings so that its output is at your desired resolution. In the following
example, we are using 1080p60 resolution.
d.
If you are using a video player, select the content you would like to stream.
e.
Once you see playback on the monitor, you’ve confirmed the source works.
(3)
Connect the HDMI cable from the video source to
HDMI In
on the encoder.
Figure 9 HDMI Connection for Encoding
(4)
In the user interface Encoder tab, verify the
Video Source
is set to
HDMI
.
Note:
Settings in the user interface cannot be changed if the unit is currently encoding.
(5)
Change
Encode Quality
to match your video source output resolution. In this example, select
Full
HD
7
. See Error! Reference source not found. for a more information about each available option in
the Encode Quality dropdown menu.
(6)
Verify
Frame Rate
is set to
Full
.
(7)
Verify
Audio Enable
is set to
True
.
6
HDCP stands for High-Bandwidth Digital Content Protection. Only non-HDCP HDMI video is supported. For example,
using a DVD player as a video source is not supported.
7
When
Full HD
or
HD
are selected, the encoder will output the resolution of the detected video source resolution.
Connect to
HDMI Source
