Z3Stream-SDI User Instructions
DOC-USR-0117-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
Z3Stream.com
22
7.2
Stream RTP/RTSP
RTP (Real-Time Transport Protocol) is a common Internet protocol for streaming media. RTP has less IP
overhead than UDP.
7.2.1
RTP/RTSP Encoder Setup
(1)
Under Output Setup, select
RTP/RTSP
in the
Output Format
dropdown menu.
When RTP/RTSP is selected, the encoder will send an RTP stream using the Dest Address and Dest
Port listed in the user interface. If RTSP will be used exclusively, the Dest Address field can be set
to
127.0.0.1
to prevent the RTP stream from being sent.
Note:
As RTSP operates through port 554, it is advised never to set the
Dest Port
field to
554
when RTP/RTSP is
selected.
(2)
Click on the
Start
button. After a moment, the encoder status will change to
RUNNING
and the
fields above will appear in dark grey.
Figure 17 Encoder Tab Configuration - RTP
Note:
Settings in the user interface cannot be changed if the unit is currently encoding.
