16
CONFIDENTIAL
DOC-USR-0133-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
5.9
Stream RTP/RTSP
Once you have UDP streaming running, it is relatively simple to change to RTP/RTSP streaming. You will
need to change one setting. To stream using RTP, complete the following steps:
In the CH1 configuration tab, click on “stop” to stop the current encoding session.
Change “Output Format” from “UDP” to “RTP/RTSP.”
Click on “start” to start the RTP/RTSP encoding session. At this point your settings should look like
the following:
Open VLC. Select “Media – Open Network Stream”.
In the “Open Media” box, type “rtsp://{IP Address}/z3-{ch #}{m}.mp4”, where {IP Address} is the IP
address of the SBE264-DVR-13, {ch #} is 1 for CH1, 2 for CH2, and 3 for CH3, and {m} is added if a
multicast address is being streamed. For example, if the IP address of the SBE264-DVR-13 is
currently 192.168.81.3, encode is being done from CH1, and unicast streaming is being done, the
user would type in “rtsp://192.168.81.3/z3-1.mp4”.
Change to “RTP/RTSP”
Figure 8 Channel 1 Configuration Screen
–
RTP
