CONFIDENTIAL
DOC-USR-0026-02
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
46
(g)
Press <return> to save your terminal settings.
(h)
The next step is to read in the u-boot environment file you just modified. If you are using minicom,
type <ctl-A> and Z to bring up the Command Summary. Then type “Y” for “Paste file.”
(i)
This should bring up the “Select file for upload” window pointing to your home directory. From
here, use the up and down arrow keys to scroll down and select the “u-boot-env-netra-rdk.txt” file
you modified and then copied in step (3e). Press the space bar to tag the file. Then, use the left
and right arrow keys to select “Okay”. Press <return>.
(j)
You should then see a series of commands being pasted on run within u-boot. The very last line
should say “Writing to Nand… done”
(k)
Type “printenv” to show the current environment variables in u-boot.
(l)
Check the value of gatewayip and netmask to make sure it conforms to your network. You can use
setenv to change anything that needs to be modified.
Figure 42 Minicom Paste File Selection
(1) Use <up> and <down> to select u-boot file
(2) Press Space to tag
(3) Use <left> and <right> to select Okay
(4) Press Return
Figure 43 Example of Successful u-boot Configuration
