CONFIDENTIAL
DOC-USR-0012-08
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
58
Dest Port
0 – 9999 (
5004
)
The port that the encoder is streaming to.
Video PID (UDP Only) 0 – 999 (
220
)
PID assigned to video in the TS stream.
PCR PID (UDP Only)
0 – 999 (
520
)
PID assigned to PCR in the TS stream.
TS Rate (UDP Only)
125K – 20000K (
8000K
)
The rate of the transport stream. Normally,
this value should be set to 1.25 * (video bit
rate + audio bit rate). This can be set to
higher values to allow leeway for times when
many bits are needed to encode. This can
be especially useful for ensuring smooth
playback at lower bitrates (see Section 5.11,
“Adjusting the UDP TS Rate,” on page 27).
stop
Stop current encode session.
start
Start encode session.
update
Can be used to change the bitrate without
stopping/restarting an encode session (see
Section 5.10, “Changing the bitrate
dynamically,” on page 26).
clone
Duplicate CH tab (can be used to quickly
copy CH1 values to CH2, for example).
delete
Used to delete excess tabs created by clone.
(status)
IDLE, STOPPED, RUNNING,
POLLING
Current status of the encoder. “POLLING”
indicates “start” was pressed and the
encoder is waiting for valid input data to be
detected.
Note 1: Input Resolutions Supported:
WQVGA (320x180), QVGA (320x240), SIF (352x240), CIF (352x288), 2-CIF (352x576), 640x360,
VGA (640x480), 4-CIF (704x576), 16:9 PAL (1024x576), D1 PAL (720x576), D1 NTSC (720x480),
720p (1280x720), XGA (1280x1024), 1080p (1920x1080)
Note 2: GOP Sizes Supported:
10, 12, 15, 25, 30, 50, 60, 100, 120, 200, 240 frames
